Simple Pull-Through Scarf

Just a fun little sewing project I came across for a cute outfit accessory!

 

source

 

Materials Needed:

Instructions:

  1. Straighten out cut edge if necessary. Measure and mark a line 7" from the cut edge, running along the width of the fabric. Cut along this line and trim off selvages.
  2. With RIGHT sides of fabric facing each other, fold fabric in half widthwise, with cut long edges even and forming a long tube. Pin along long edges.
  3. Stitch long edge in a 1/2" seam. Trim corners.
  4. Pin one short end closed and stitch in a 1/2" seam. Trim off remaining corner.
  5. Turn the tube RIGHT side out through remaining opening in scarf, poking corners out gently as far as they will go.
  6. Fold the ends of the opening to the INSIDE 1/2" and pin in place. Slip stitch opening closed with hand sewing needle and matching thread.
  7. Press scarf flat. To wear, pull both ends of scarf through slide buckle (as shown in photo above).
Copyright for the pattern above belongs exclusively to Simplicity/Simplicity Creative Group.

Share your thoughts here!

Post a Comment

Thank you for visiting with me today!